Mylar Adhesive Backed PVC Cards

Mylar adhesive-backed PVC cards are ideal for printing on most direct-to-card printers. The Mylar backing offers greater thickness than paper backing for easier feeding. Adhesive backed PVC cards are typically applied to proximity/technology cards.

These cards measure 3.375” x 2.125”, the same dimensions as a credit card. These Mylar adhesive back PVC cards are 10 mil thick and are packaged in five shrink-wrapped packs of 100, for a total of 500 blank ID cards, and are vision inspected to ensure quality.

Remember: If you’re placing these cards on pre-slotted access control cards, you will need a slot punch to render a hole in the Mylar adhesive-backed PVC card. Slot punching should be done AFTER printing to avoid damage to your printhead.

Note: This product is not compatible with Magicard printers. Magicard printers require the use of M3610-054B adhesive backed cards.

Note: 10 mil cards may not feed into every card printer. Please check your card printer specifications.

SPECIFICATIONS

• White
• Superior/graphic quality cards
• 500 cards (packaged in 5 packs of 100)
• 100% PVC
• Standard credit card size
• 3.375″ x 2.125″ (85.6 mm x 54 mm)
• 0.10 mil thickness*
• Note: This product is not compatible with Magicard printers. Magicard printers require the use of M3610-054B adhesive backed cards.

*Card thickness is approximately 0.25 mil before removal of 0.15 mil adhesive back. May not feed/work in every dye-sub card printer. Please check your card printer specifications.

Corresponds with the following vendor part numbers:

• Fargo – 82267
• Zebra – 104523-010